1023E Sub-Compact Utility Tractor

1023E Sub-Compact Utility Tractor

Overview

  • Powerful Final Tier 4-compliant diesel engine
  • New, easy-lift hood with dual gas-charged lift struts
  • Auto-Connect™ mid-mower deck can be installed or removed in less than 5 minutes
  • Easy-to-operate two speed hydrostatic transmission
Build your own

Specifications

Key Specs

Engine power (gross) 16.5 kW
22.4 hp
Power take-off (PTO) power 10.8 kW
14.5 hp
Steering hydraulics 10.8 L/min
2.8 gpm
Implement hydraulics 13.2 L/min
3.5 gpm
Hitch type Limited Category 1
Lift capacity, 24-in. behind link arms 309 kg
681 lb
Standard transmission; forward/reverse Hydrostatic - 2 range
Cruise control No
Approximate shipping weight (open-station; cab) 610 kg
1345 lb
Wheelbase 145 cm
57.1 in.

Engine

Family EYDXL0.99NS2
FYDXL0.99NS2
GYDXL0.99NS2
Manufacturer Yanmar
Engine model 3TNM74F-NCJT
Engine power (gross) 16.5 kW
22.4 hp
Power take-off (PTO) power 10.8 kW
14.5 hp
Rated engine speed 3200 rpm
Type Diesel
Injection pump type Indirect Injection
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 0.993 L
3 / 60.6 cu in.
Number of cylinders Three
Cylinder liners Cast-In-Block
Bore and stroke 74x77 mm
2.91 x 3.03 in.
Compression ratio 23.5:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element
Engine torque at rated speed 49.2 Nm
36.3 lb-ft
Fuel tank capacity 21.2 L
5.6 U.S. gal.

Electrical

Battery size 500 CCA
Alternator (12-V) 40 amp
Starter size 1.2 kW
1.6 hp

Fuel system

Type Indirect Injection
Fuel consumption
5.3 L/hr
1.4 U.S. gal./hr

Transmission

Standard transmission; forward/reverse Hydrostatic - 2 range
Optional transmission; forward/reverse
Left-hand reverser No
Transmission gear ranges
Final drive Bull Gear
Brakes Wet disc (left-hand pedal)
Steering Power
Clutch, wet/dry N/A
Clutch disk diameter wet clutch
Axle capacity Front
612 kg
1349 lb
Rear
715 kg
1576 lb
Creeper No
Cruise control No
Differential lock Yes
Drawbar maximum vertical load

Hydraulics

Type Open Center
Pump rated output Steering
10.8 L/min
2.8 gpm
Implement
13.2 L/min
3.5 gpm
24 L/min
6.3 gpm
Pump type Gear
Maximum operating pressure 2150 psi
Draft control sensing Select Control
Remote control valves available Two

3-point hitch

Type Limited Category 1
Lift capacity, 24-in. behind link arms 309 kg
681 lb

Power take-off (PTO)

Standard Rear - 540 rpm
Mid - 2100
Optional
Control Independent
Clutch Wet disc
Brake (for mid and rear PTO) Wet disc
Engagement method

Fluid capacities

Crankcase with filter 2.7 L
2.9 qt
Transmission and hydraulic system 14 L
3.7 qt

Final drive

Type Bull Gear
Differential lock Yes

Operator station

Rollover protective structure Type
Foldable
Yes
Platform - flat/straddle One-piece semi flat
Gear shift location - console/floor Left Hand Side

Cab

Compliance NA
Visibility NA
Air conditioning, temperature differential NA
Doors NA
Noise rating NA
Seat equipment NA

Dimensions

Wheelbase 145 cm
57.1 in.
Front axle clearance 195 mm
7.7 in.
Turning radius with brakes
Turning radius without brakes 2.25 m
7.4 ft
Limited slip differential No
Approximate shipping weight (open-station; cab) 610 kg
1345 lb

Tires

Front R4 - 18x8.5-10
Rear R4 - 26x12-12
Front tread range 91.8 cm
36.1 in.
Rear tread spacing 89.5 cm

Miscellaneous

Toolbox Yes
Tilt steering wheel
12-V Outlet

Additional information

Date collected