2038R Compact Utility Tractor

2038R Compact Utility Tractor

Overview

  • Powerful and fuel-efficient Tier IV Yanmar engine
  • AutoConnect™ Drive-over Mower Decks up to 72 inches
  • New model is on larger, heavier frame for added stability
  • Standard cruise control, 12-V outlet and premium seating
Build your own
Online Brochures

Specifications

Key Specs

Engine power (gross) 27.4 kW
37.3 hp
SAE J1995 rated power
Power take-off (PTO) power 22.7 kW
30.4 hp
Steering hydraulics 15 L/min
4 gpm
Implement hydraulics 20.2 L/min
5.3 gpm
Hitch type Category 1
Lift capacity, 24-in. behind link arms 615 kg
1356 lb
Standard transmission; forward/reverse Hydrostatic transmission (HST)
Cruise control Standard
Approximate shipping weight (open-station; cab) 1105 kg
2436 lb
Wheelbase 172.5 cm
67.9 in.

Engine

Family GYDXL1.57TDA
Manufacturer Yanmar
Engine model 3TNV88C-NJT
Engine power (gross) 27.4 kW
37.3 hp
SAE J1995 rated power
Power take-off (PTO) power 22.7 kW
30.4 hp
Rated engine speed 2500 rpm
Type Direct Injection
Injection pump type Direct Injection
Aspiration Turbocharged
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.568 L
3 / 95.8 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 86x90 mm
3.39x3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element
Engine torque at rated speed 101.4 Nm
74.8 lb-ft
Fuel tank capacity 32 L
8.5 U.S. gal.

Electrical

Battery size 500 CCA
Alternator (12-V) 85 amp
Starter size 1.4 kW
1.9 hp

Fuel system

Type Direct Injection
Fuel consumption

Transmission

Standard transmission; forward/reverse Hydrostatic transmission (HST)
Optional transmission; forward/reverse
Left-hand reverser
Transmission gear ranges
Final drive Bull Gear
Brakes Wet disc
Steering Power steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacity Front
880 kg
1940 lb
Rear
1089 kg
2400 lb
Creeper No
Cruise control Standard
Differential lock Yes
Drawbar maximum vertical load

Hydraulics

Type Open center
Pump rated output Steering
15 L/min
4 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm
Pump type Gear
Maximum operating pressure 172.37 bar
2500 psi
Draft control sensing Position control
Remote control valves available Up to three

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 615 kg
1356 lb

Power take-off (PTO)

Standard Rear - 540 rpm
Mid - 2000 rpm
Optional
Control Independent
Clutch Independent
Brake (for mid and rear PTO) Wet disc
Engagement method

Fluid capacities

Crankcase with filter 4.5 L
4.8 qt
Transmission and hydraulic system

Final drive

Type Spur Gear
Differential lock Yes

Operator station

Rollover protective structure Type
Foldable
ASABE S478
Platform - flat/straddle Flat
Gear shift location - console/floor Left-hand side

Cab

Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment

Dimensions

Wheelbase 172.5 cm
67.9 in.
Front axle clearance
Turning radius with brakes 2.75 m
9.02 ft
Turning radius without brakes 3 m
9.84 ft
Limited slip differential
Approximate shipping weight (open-station; cab) 1105 kg
2436 lb

Tires

Front R1 Ag 7.00-12
R3 Turf 23x8.50-14
R4 Industrial 23x8.50-14
R3 Turf Radial 200/60 R15
Rear R1 Ag 12.4-16
R3 Turf 14-17.5
R4 Industrial 14-17.5
R3 Turf Radial 300/70 R20
Front tread range
Rear tread spacing

Miscellaneous

Toolbox Yes
Tilt steering wheel Yes
12-V Outlet Yes

Additional information

Date collected