The John Deere 2600 Series offer three disk models that provide a wide range of variety for all tillage applications.
Model |
2620 Disk | 2623 Disk | 2625 Disk |
Purpose | Secondary (light duty) | Dual purpose (medium duty) | Primary (heavy duty) |
Working depth (mm, in.) | Up to 130 mm (5 in.) | Up to 180 mm (7 in.) | Up to 200 mm (8 in.) |
Weight per blade (kg, lb) | Minimum 68 kg (150 lb) | Under 13.4 m (44 ft) Minimum 86 kg (190 lb) Over 13.4 m (44 ft) Minimum 91 kg (200 lb) |
Minimum 127 kg (280 lb) |
Blade size (mm, in.) | 560 or 610 mm (22 in. or 24 in.) |
610 or 660 mm (24 in. or 26 in.) |
610 or 660 mm (24 in. or 26 in.) |
Blade spacing (mm, in.) | 185 or 230 mm (7.25 in. or 9 in.) |
230 mm (9 in.) | 230 mm (9 in.) (front) and 280 mm (11 in.) (rear), or 280 mm (11 in.) |
Horsepower (hp/m, hp/ft) | 23 - 36 m/hp (7 - 11 ft/hp) | 23 - 36 m/hp (7 - 11 ft/hp) | 26 - 36 m/hp (8 - 11 ft/hp) |
Working widths (m, ft) | 6.3 m - 15.0 m (20.75 ft - 49.25 ft) |
6.3 m - 15.0 m (20.75 ft - 49.25 ft |
7.2 m-12.4 m (23.58 - 40.66 ft) |
Operating speed (km/h, mph | 6.5 - 11.3 km/h (4 - 7 mph) |
6.5 - 11.3 km/h (4 - 7 mph) |
6.5 - 11.3 km/h (4 - 7 mph) |
Recommended use |
|
|
|
John Deere's 2600 Series Disks offer different blade options for soil penetration and residue sizing.
Blade type | Cone blades (John Deere exclusive) |
Solid-spherical blades | Cutout-spherical blades |
Recommended application |
|
|
|
Recommended soil type | Heavy soils | Light to medium soils | Heavy to medium soils |
Benefits | Move soil and reside freely, but also increase draft requirements | Better control of soil than cone blades since less sensitive to over speeding | Chopping or trapping residue |
Penetration | Penetrate well at a 20-degree gang angle, but best at a 22-degree gang angle | Penetrate best at a 20-degree gang angle | Penetration is excellent with a cutout blade |
NOTE: Cone blades not recommended in rocky conditions.
As crop yields increase, so does the amount of residue after harvest. The John Deere 2625 Disk gives operators a primary disk option that has up to 300 lb/blade to size and bury residue in the toughest residue and field conditions.
Utilize the residue calculator to identity the optimal residue management solution to meet the operator’s needs.
Hydraulic fore-aft leveling comes as standard equipment with John Deere's 2600 Series Disks. Operators can level the disk from the comfort of the tractor cab.
John Deere's 2600 Series Disks provide an innovative approach to tension disk gang bolts.
John Deere’s 2600 Series Disks feature a sealed maintenance-free bearing. A high-density polymer liner allows the bearing to dynamically align the shaft in rough field conditions. The bearing and high-density polymer liner sit inside cast housing. This cast housing was designed for strength and reliability as well as a built-in bearing wear guard.
These bearings increase productivity by reducing the amount of time needed to service the disk before operation and allowing customers to spend more time in the field.
Working width | 9.35 m 30.67 ft |
|||
---|---|---|---|---|
Transport width | 4.7 m 15.5 ft |
|||
Transport height | 3.96 m 13 ft |
|||
Gang standards | C-spring | |||
Gang angle | 21/19 degree (angle) | |||
Purpose | Primary | |||
Working depth | Up to 20.3 cm 8 in. |
|||
Weight per blade | 127.9 kg 282 lb |
|||
Blade size | 60.96 or 66.04 cm 24 or 26 in. |
|||
Blade spacing | Option one - front and rear spacing both - 280 mm 11 in. Option two - front spacing / rear spacing - 230 / 280 mm 9 / 11 in. |
|||
Horsepower per ft (PTO) | 6.7 to 8.2 kW 9 to 11 hp |
|||
Operating speed | 8.05 to 11.3 km/h 5 to 7 mph |
Front blades | Option one - 34 with front and rear spacing both - 280 mm 11 in. Option two - 37 with front spacing / rear spacing of - 230 / 280 mm 9 / 11 in. |
|||
---|---|---|---|---|
Rear blades | Option one - 34 with front and rear spacing both - 280 mm 11 in. Option two - 37 with front spacing / rear spacing of - 230 / 280 mm 9 / 11 in. |
|||
Total | Option one - 68 with front and rear spacing both - 280 mm 11 in. Option two - 74 with front spacing / rear spacing of - 230 / 280 mm 9 / 11 in. |
Main frame front | Option one - 6 with spacing of 280 mm 11 in. Option two - 6 with spacing of 230 (front) and 280 (rear) mm 9 (front) and 11 (rear) in. |
|||
---|---|---|---|---|
Main frame rear | Option one - 4 with spacing of 280 mm 11 in. Option two - 4 with spacing of 230 (front) and 280 (rear) mm 9 (front) and 11 (rear) in. |
|||
1st wing front | Option one - 6 with spacing of 280 mm 11 in. Option two - 6 with spacing of 230 (front) and 280 (rear) mm 9 (front) and 11 (rear) in. |
|||
1st wing rear | Option one - 6 with spacing of 280 mm 11 in. Option two - 8 with spacing of 230 (front) and 280 (rear) mm 9 (front) and 11 (rear) in. |
|||
2nd wing front | ||||
2nd wing rear | ||||
Total | Option one - 22 with spacing of 280 mm 11 in. Option two - 24 with spacing of 230 (front) and 280 (rear) mm 9 (front) and 11 (rear) in. |
Date collected |
---|