3025E Compact Utility Tractor

3025E Compact Utility Tractor

Overview

  • Standard four-wheel drive (4WD) for maximum traction
  • Tightest turning radius in its horsepower class
  • Hydro transmission with Twin Touch™ pedals for ease of use
  • On-board diagnostics including Service Advisor
Build your own

Specifications

Key Specs

Engine power (gross) 18.2 kW
24.4 hp
Power take-off (PTO) power 14.4 kW
19.4 hp
Steering hydraulics 15 L/min
4 gpm
Implement hydraulics 20.2 L/min
5.3 gpm
Hitch type Category 1
Lift capacity, 24-in. behind link arms 615.1 kg
1356 lb
Standard transmission; forward/reverse Hydrostatic transmission (HST)
Cruise control Optional
Approximate shipping weight (open-station; cab) 1007.9 kg
2222 lb
Wheelbase 159.5 cm
62.8 in.

Engine

Family EYDXL1.64NDA
FYDXL1.64NDA
GYDXL1.64NDA
Manufacturer Yanmar
Engine model 3TNV88F-EPJT2
Engine power (gross) 18.2 kW
24.4 hp
Power take-off (PTO) power 14.4 kW
19.4 hp
Rated engine speed 2400 rpm
Type
Injection pump type Direct injection
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.64 L
3 / 100.2 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 88 x 90 mm
3.46 x 3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element
Engine torque at rated speed 69.6 Nm
51.3 lb-ft
Fuel tank capacity 28.5 L
7.5 U.S. gal.

Electrical

Battery size 500 CCA
Alternator (12-V) 55 amp
Starter size 1.4 kW
1.9 hp

Fuel system

Type Direct injection
Fuel consumption

Transmission

Standard transmission; forward/reverse Hydrostatic transmission (HST)
Optional transmission; forward/reverse
Left-hand reverser
Transmission gear ranges
Final drive Bull Gear
Brakes Wet disc
Steering Power steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacity Front
798 kg
1760 lb
Rear
1197 kg
2640 lb
Creeper No
Cruise control Optional
Differential lock Yes
Drawbar maximum vertical load

Hydraulics

Type Open center
Pump rated output Steering
15 L/min
4 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm
Pump type Dual gear
Maximum operating pressure 172.4 bar
2500 psi
Draft control sensing Position control
Remote control valves available Up to two (optional)

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 615.1 kg
1356 lb

Power take-off (PTO)

Standard Rear - 540 rpm
Optional
Control Independent
Clutch Independent
Brake (for mid and rear PTO) Wet disc
Engagement method

Fluid capacities

Crankcase with filter 4.5 L
4.8 qt
Transmission and hydraulic system

Final drive

Type Bull Gear
Differential lock

Operator station

Rollover protective structure Type
Foldable
ASABE S478
Platform - flat/straddle Semi-flat
Gear shift location - console/floor Left-hand side

Cab

Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment

Dimensions

Wheelbase 159.5 cm
62.8 in.
Front axle clearance 36.3 cm
14.3 in.
Turning radius with brakes
Turning radius without brakes 2.9 m
9.4 ft
Limited slip differential
Approximate shipping weight (open-station; cab) 1007.9 kg
2222 lb

Tires

Front Farm - 7-14
Turf - 27x8.5-15
R4 - 25x8.5-14
R4 - 27x8.5-15
Rear Farm - 11.2-24
Turf - 41x14-20
R4 - 15-19.5
R4 - 43x16-20
Front tread range
Rear tread spacing

Miscellaneous

Toolbox
Tilt steering wheel
12-V Outlet

Additional information

Date collected