3046R Compact Utility Tractor

3046R Compact Utility Tractor

Overview

  • Powerful and reliable Yanmar Diesel Engine
  • AutoConnect™ deck compatible for deck attach/detach in seconds
  • Cab or Open Station configuration available
  • Standard hydrostatic transmission with Twin Touch™ pedals
Build your own

Specifications

Key Specs

Engine power (gross) 33.3 kW
45.3 hp
Power take-off (PTO) power 27.3 kW
36.6 hp
Steering hydraulics 22.3 L/min
5.9 gpm
Implement hydraulics 32.5 L/min
8.6 gpm
Hitch type Category 1
Lift capacity, 24-in. behind link arms 997.9 kg
2200 lb
Standard transmission; forward/reverse Gear 4WD / eHydro (electronic hydrostatic)
Cruise control Standard
Approximate shipping weight (open-station; cab) ROPS - 1315.4 kg
2900 lb
Cab - 1619.3 kg
3570 lb
Wheelbase 172.7 cm
68 in.

Engine

Family EYDXL1.57HDA
FYDXL1.57HDA
GYDXL1.57HDA
Manufacturer Yanmar
Engine model 3TNV86CHT-MJT
Engine power (gross) 33.3 kW
45.3 hp
Power take-off (PTO) power 27.3 kW
36.6 hp
Rated engine speed 2600 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Turbocharged and charge air cooled
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.496 L
3 / 91.3 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 86 x 90 mm
3.4 x 3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element with electronic restriction indicator
Engine torque at rated speed 112 Nm
90 lb-ft
Fuel tank capacity Rollover protective structure (ROPS) - 51.1 L
13.5 U.S. gal.
Cab - 44.7 L
11.8 U.S. gal.

Electrical

Battery size 500 CCA
Alternator (12-V) 75 amp
Starter size 1.4 kW
1.9 hp

Fuel system

Type High pressure common rail direct injection
Fuel consumption
10.6 L/hr
2.8 gph

Transmission

Standard transmission; forward/reverse Gear 4WD / eHydro (electronic hydrostatic)
Optional transmission; forward/reverse
Left-hand reverser
Transmission gear ranges 12F/12R PowrReverser
3-range, infinitely variable
Final drive Bull Gear
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacity Front
720-1450 kg
1587-3197 lb
Creeper SpeedMatch optional
Cruise control Standard
Differential lock
Drawbar maximum vertical load

Hydraulics

Type Open center
Pump rated output Steering
22.3 L/min
5.9 gpm
Implement
32.5 L/min
8.6 gpm
54.5 L/min
14.4 gpm
Pump type Dual gear
Maximum operating pressure 172.4 bar
2500 psi
Draft control sensing Position control
Remote control valves available Up to four rear remotes

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 997.9 kg
2200 lb

Power take-off (PTO)

Standard Rear - 540 rpm
Optional Mid - 2000 rpm
Control Position control
Clutch Multiple wet disc
Brake (for mid and rear PTO) Multiple wet disc
Engagement method

Fluid capacities

Crankcase with filter 5.7 L
6 qt
Transmission and hydraulic system 25.7 L
6.8 U.S. gal.

Final drive

Type Bull Gear
Differential lock

Operator station

Rollover protective structure Type
Foldable
Yes
Platform - flat/straddle Flat
Gear shift location - console/floor Left-hand side

Cab

Compliance Complies with OSHA, SAE, and CSA standards for roll-over protection
Visibility 360 degree (angle)
Air conditioning, temperature differential
Doors Two
Noise rating 80 dBA
Seat equipment Scissor-link

Dimensions

Wheelbase 172.7 cm
68 in.
Front axle clearance 31 cm
12.2 in.
Turning radius with brakes 2.7 m
8.8 ft
Turning radius without brakes
Limited slip differential
Approximate shipping weight (open-station; cab) ROPS - 1315.4 kg
2900 lb
Cab - 1619.3 kg
3570 lb

Tires

Front Farm - 7-14
Turf (Gear 4WD) - 27x8.50-15
Turf (HST 4WD) - 25x10.5LLx15
R4 - 25x8.5-14
Rear Farm - 11.2-24
Turf - 41x14-20 or 41x18LL-16.1
R4 - 15-19.5
Front tread range 114 cm
44.9 in.
Rear tread spacing 103.1 cm
40.6 in.

Miscellaneous

Toolbox
Tilt steering wheel
12-V Outlet

Additional information

Date collected