4045TFC03 4.5L Industrial Diesel Engine

4045TFC03 4.5L Industrial Diesel Engine

Overview

  • PowerTech™ EWX
  • 55 kW (74 hp)
Request A Quote
Features

Features

Expand All Collapse All

Ready to run. Stage V.

  • John Deere is ready to work, ready to generate, and ready to run with engines meeting EU Stage V emissions regulations. This means OEM customers currently using a John Deere engine with a diesel particulate filter (DPF) won’t have to re-engineer their machines to meet the requirements of Stage V regulations. John Deere has been using DPF technology since Interim Tier 4/Stage III B and is well positioned to help customers transition to the EU’s Stage V standard. We have extensive experience with the development and integration of DPFs in both John Deere and OEM equipment, with more than 425 million DPF hours in the field.*

* Data compiled September 2016

Wastegated turbocharger

  • Wastegated turbochargers are designed to develop more airflow at lower engine speeds to improve low-speed torque. The wastegate control device bleeds off a portion of the exhaust flow at higher engine speeds. Wastegated turbos deliver improved transient response and higher peak torque without compromising engine envelope size. They also provide the lowest installed cost across a given power range.

Exhaust filters

  • These engines utilize a catalyzed exhaust filter that contains a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF). The DOC reacts with exhaust gases to reduce carbon monoxide, hydrocarbons, and some particulate matter (PM). The downstream DPF traps and holds the remaining PM. Trapped particles are oxidized within the DPF through a continuous cleaning process called passive regeneration. Passive regeneration occurs during normal operating conditions when heat from the exhaust stream and catalysts within the exhaust filter trigger the oxidation of the trapped PM. If passive regeneration cannot be achieved due to low temperature, load, or speed, then PM is removed using active regeneration — an automatic cleaning process controlled by the exhaust temperature management system.

High-pressure common-rail (HPCR) and engine control unit (ECU)

  • The HPCR fuel system provides variable common-rail pressure and higher injection pressures up to 1,600 bar (23,000 psi). It also controls fuel injection timing and provides precise control for the start, duration, and end of injection.

2-valve cylinder head

  • Cross-flow head design provides excellent breathing from a lower-cost 2-valve cylinder head.

Specifications

Emissions certifications

CARB
EPA Tier 4
EU Stage III B

General engine data

Model 4045TFC03
Number of cylinders 4
Displacement-- L (cu in) 4.5 (275)
Bore and Stroke-- mm (in) 106 x 127 (4.17 x 5.00)
Compression Ratio 19.0 : 1
Engine Type In-line, 4-cycle
Aspiration Turbocharged
Length - mm (in) 870 (34.3)
Width-- mm (in) 720 (28.3)
Height-- mm (in) 960 (37.8)
Weight, dry - kg (lb) 510 (1124)

DOC/DPF Dimensions

Size 2 - Diameter - mm (in) 209 (8.2)
Size 2 - Length - mm (in) 573 (22.6)
Size 2 - Weight - kg (lb) 20 (44.1)

Performance data range

Continuous - Rated power/Rated speed 55 kW (74 hp) @2200-2400 rpm
Continuous - Peak power 55 kW (74 hp) @2200-2400 rpm
Continuous - Power bulge 0 %
Continuous - Peak torque 304 N·m (224 ft-lb) @1600 rpm
Continuous - Torque rise 39%