6068HFC94 6.8L Industrial Diesel Engine

6068HFC94 6.8L Industrial Diesel Engine

Overview

  • 6.8L PowerTech™ PVX
  • 138 - 187 kW (185 - 250 hp)
Build your own
Features

Features

Expand All Collapse All

Engine performance

  • Multiple rated speeds to further reduce noise and improve fuel economy
  • Higher level of peak torque
  • Optional power bulge

Cooled exhaust gas recirculation (EGR)

  • EGR cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing NOx.

Variable geometry turbocharger

  • Varies exhaust pressure based on load and speed to ensure proper EGR flow. The combination of the cooled EGR and VGT provide low-speed torque, quicker transient response, higher-peak torque, and world-class fuel economy.

High-pressure common-rail (HPCR) and engine control unit (ECU)

  • The HPCR fuel system provides variable common-rail pressure and higher injection pressures up to 1,975 bar (29,000 psi).One ECU controls the exhaust filter, as well as fuel system and provides precise control for the start, duration, and end of injection.

4-valve cylinder head

  • The 4-valve cylinder head provides excellent airflow resulting in greater low-speed torque and better transient response time by utilizing a cross-flow design.

Air-to-air aftercooled

  • This is the most efficient method of cooling intake air to help reduce engine emissions while maintaining low-speed torque, transient response time, and peak torque. It enables an engine to meet emissions regulations with better fuel economy and the lowest installed costs.

Exhaust filters

  • These engines utilize a catalyzed exhaust filter that contains a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF). The DOC reacts with exhaust gases to reduce carbon monoxide, hydrocarbons, and some particulate matter (PM). The downstream DPF traps and holds the remaining PM. Trapped particles are oxidized within the DPF through a continuous cleaning process called passive regeneration.
  • Passive regeneration occurs during normal operating conditions when heat from the exhaust stream and catalysts within the exhaust filter trigger the oxidation of the trapped PM. If passive regeneration cannot be achieved due to low temperature, load, or speed, then PM is removed using active regeneration — an automatic cleaning process controlled by the exhaust temperature management system.

Compact size

  • Lower installed cost
  • Mounting points are the same as previous engine models

Additional features

  • JDLink™ lets you monitor, protect, and maintain your equipment 24/7
  • Premium software option integrates with equipment or vehicles to reduce engineering and installation costs
  • 500-hour oil change
  • Optional factory installed variable-speed fan drive improves fuel economy and reduces noise levels
  • R.H. and L.H. engine-mounted final fuel filters
  • Low-pressure fuel system with electrical transfer pump and "auto-prime" feature

Specifications

Emissions certifications

CARB
EPA Interim Tier 4
EU Stage III B

General engine data

Model 6068HFC94
Number of cylinders 6
Displacement-- L (cu in) 6.8 (415)
Bore and Stroke-- mm (in) 106 x 127 (4.17 x 5.00)
Compression Ratio 17.2 : 1
Engine Type In-line, 4-cycle
Aspiration Turbocharged and air-to-air aftercooled
Length - mm (in) 1161 (45.7)
Width-- mm (in) 716 (28.2)
Height-- mm (in) 1147 (45.2)
Weight, dry - kg (lb) 767 (1691)

DOC/DPF Dimensions

Size 5 - Diameter - mm (in) 320.5 (12.6)
Size 5 - Length - mm (in) 891.9 (35.1)
Size 5 - Weight - kg (lb) NA

Performance data range

Intermittent - Rated power/Rated speed 168-187 kW (225-250 hp) @2000-2400 rpm
Intermittent - Peak power 183-190 kW (245-255 hp) @1800-2200 rpm
Intermittent - Power bulge 2-10 % @1800-2200 rpm
Intermittent - Peak torque 1020-1025 N·m (752-756 ft-lb) @1600 rpm
Intermittent - Torque rise 28-37%
Heavy Duty - Rated power/Rated speed 149-168 kW (200-225 hp) @2000-2400 rpm
Heavy Duty - Peak power 164-168 kW (220-225 hp) @1800-2400 rpm
Heavy Duty - Power bulge 0-10 % @1800 rpm
Heavy Duty - Peak torque 902-963 N·m (665-710 ft-lb) @1600 rpm
Heavy Duty - Torque rise 35%
Continuous - Rated power/Rated speed 138-149 kW (185-200 hp) @2000-2400 rpm
Continuous - Peak power 149-152 kW (200-204 hp) @1800-2400 rpm
Continuous - Power bulge 0-10 % @1800 rpm
Continuous - Peak torque 800-890 N·m (590-656 ft-lb) @1600 rpm
Continuous - Torque rise 35%