6090HF485 9.0L Generator Drive Engine

6090HF485 9.0L Generator Drive Engine

Overview

  • PowerTech™ Plus
  • Standby: 315 kW (422 hp) @ 1800 rpm
  • Prime: 287 kW (385 hp) @ 1800 rpm
Request A Quote
Features

Features

Expand All Collapse All

JET FUEL CAPABLE

  • The John Deere jet fuel capable engines run on military, arctic, and aviation fuel, including Jet A, Jet A-1, JP-5, and JP-8. If you need to switch back to diesel fuel, just fill up the tank and go.

COOLED EXHAUST GAS RECIRCULATION-EGR

  • Cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing NOx

VARIABLE GEOMETRY TURBOCHARGER (VGT)

  • Varies exhaust pressure based on load and speed to ensure proper EGR flow and best-in-class fuel economy.

HIGH-PRESSURE COMMON-RAIL (HPCR) AND ENGINE CONTROL UNIT (ECU)

  • The HPCR fuel system provides variable common-rail pressure, multiple injections, and higher injection pressures up to 1,600 bar (23,000 psi). It also controls fuel injection timing and provides precise control for the start, duration, and end of injection.

4-VALVE CYLINDER HEAD

  • The 4-valve cylinder head provides excellent airflow by utilizing a cross-flow design

AIR-TO-AIR AFTERCOOLED

  • This is the most efficient method of cooling intake air to help reduce engine emissions. It enables an engine to meet emissions regulations with better fuel economy and the lowest installed costs

COMPACT SIZE

  • Horsepower/displacement ration is best-in-class
  • Lower installed cost
  • Mounting points are the same as previous engine models

JOHN DEERE ELECTRONIC ENGINE CONTROLS

  • Electronic engine controls monitor critical engine functions, providing warning and/or shutdown to prevent costly engine repairs and eliminate the need for add-on governing components, all lowering total installed costs.

ADDITIONAL FEATURES

  • Self adjusting poly-vee fan drive
  • Single-piece low-friction steel piston
  • Low-pressure fuel system with electrical transfer pump and "auto-prime" feature
  • Directed top-liner cooling

Specifications

Emissions certifications

CARB
EPA Tier 3

General engine data

Model 6090HF485
Number of cylinders 6
Displacement-- L (cu in) 9.0 (549)
Bore and Stroke-- mm (in) 118.4 x 136 (4.66 x 5.35)
Compression Ratio 16.0 : 1
Engine Type In-line, 4-Cycle
Aspiration Turbocharged and air-to-air aftercooled
Length - mm (in) 1211 (47.7)
Width-- mm (in) 633 (24.9)
Height-- mm (in) 1260 (49.6)
Weight, dry - kg (lb) 1096.8 (2418)

Performance data range

Hz (rpm) 60 ( 1800 )
50 ( 1500 )
Generator Efficiency % 90-94
90-94
Power Factor 0.8
0.8
Engine power - Prime kW 245
193
Engine power - Prime hp 328
259
Engine power - Standby kW 269
212
Engine power - Standby hp 361
285
Rated Fan Power - kW 16.1
12.7
Rated Fan Power - hp 21.6
17.0
Calculated generator set output - Prime kWe 213-223
168-176
Calculated generator set output - Prime kVA 267-279
210-220
Calculated generator set output - Standby kWe 235-245
185-193
Calculated generator set output - Standby kVA 294-307
231-242