6120E Utility Tractor

6120E Utility Tractor

Overview

  • FT4 John Deere PowerTech™ engine
  • 12/12 or 24/12 hi-lo PowrReverser™ transmission
  • Cab, open station, 2WD or MFWD
  • 15 degrees of seat swivel with optional air-ride seat
Build your own
Online Brochures

Specifications

Official Test

Nebraska Test number Yet to be tested

Engine

Manufacturer John Deere PowerTech? PWL (B20 Diesel Compatible)
Engine family
Aspiration Wastegate turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
Cylinders/Displacement, cu. in. (L) 4.5 L
275 cu in.
Cylinder Liners Wet
Fuel tank capacity, US Gal. (L) (Open; Cab) Standard
168 L
44.4 U.S. gal.
Underhood muffler

Performance

Advertised PTO hp (kW) @ Rated rpm 76 @ 2100 rpm kW
102 @ 2100 rpm PTO hp
Official PTO hp (kW) @ Rated rpm
Advertised Engine hp (kW) @ Rated speed 88 @ 2200 kW
120 @ 2200 engine hp
Max Unballast Drwbr hp (kW) @ Eng rpm
Maximum Torque (PTO) @ rpm, lb-ft (Nm)
Max Torque Rise (80% rtd spd) @ Eng rpm 25% @ 1600 rpm
Maximum Torque Rise % (PTO) @ Eng rpm 30%

Fuel Use, U.S. gal./hr & hp hr/gal. at:

PTO @ Rated Eng rpm
Standard PTO Speed @ Eng speed
Maximum PTO Power @ Eng rpm
Maximum Engine Power @ Eng rpm
Max Unballasted Drawbar Power @ Eng rpm
75% Load, Full Engine rpm (Unballasted)
75% Load @ Reduced rpm (Unballasted)

Transmission

Std. Transmission; Forward/Reverse 12F/12R PowrReverser Transmission (30) km/h
12F/12R PowrReverser Transmission (19) mph
Opt. Transmission; Forward/Reverse 24F/12R PowrReverser Transmission (40) km/h
24F/12R PowrReverser Transmission (25) mph
Reverser Base LH
On-the-Go Shifting (Yes/No/Partial) Yes
Clutch; Wet/Dry Wet
Creeper No

Power Take-Off (PTO)

Standard Independent 540/1000
Optional
PTO Speeds @ Engine rpm 540 @ 2085 or 1000 @ 2067 rpm
PTO Actuation Electronic

Hydraulics

Type Open-center
Pump Rated Output, GPM (L/min.) Standard
20.0 Advertised gpm
75.7 Advertised L/min
Rated Flow @ One SCV, GPM (L/min.) 20.0 gpm
75.7 L/min
Max Output @ SCV Couplers, GPM (L/min.) 20.8 gpm
78.5 L/min
Maximum Operating Pressure, psi (kPa) 19,500 kPa
2828 psi
Maximum Hydraulic Power, hp (kW)
Hitch Draft Control Load Sense Type Lower-link
Remote Control Valves Available 2 std., 3 opt. with deluxe coupler
Hitch Category (SAE Designation) Category II
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. Standard
2500 kg Advertised with 2 x 70 mm lift cylinders
5500 lb Advertised with 2 x 70 mm lift cylindersOptional
3318 kg Advertised with 2 x 80 mm lift cylinders
7300 lb Advertised with 2 x 80 mm lift cylinders
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)
Sensing type Mechanical
Joystick SCV control Mid mount, opt.

Final Drive

Type Inboard planetary
Differential controls Mechanical
Availability
Engage On-the-Go Rear Differential Lock Yes
Axle Type Flanged
Brakes, Type and Control Mechanically actuated wet disk

Operator Station

Rollover Protective Structure, OOS Rigid - Foldable - Telescopic
FoldablePlatform - Flat/Straddle
FlatGearshift Location - Console/Floor
Floor
Yes
Cab Doors
2Platform - Flat/Straddle
FlatdB(A) Rating
77.2Seat Suspension System
Mechanical, Air opt.

2WD Dimensions

Wheelbase, in. (mm) 2456 mm
96.7 in.
Front Tread Range, in. (mm) 1523-2033 mm
60.0-80.0 in.
Rear Tread Range, in. (mm) 1512-2012 mm
59.5-79.2 in.
Minimum Rear Tread Setting, in. (mm) 1523 mm
60.0 in.
Front Axle Clearance, in. (mm) 597 mm
23.5 in.
Turning Radius w/Brakes, ft (m) 2.1 m @ 64.4 in. tread setting
7 ft. @ 64.4 in. tread setting
Turning Radius w/o Brakes, ft (m) 2.9 m @ 64.4 in. tread setting
9.5 ft @ 64.4 in. tread setting
Unballasted Operating Weight, lb (kg)
Approx. Ship Wgt, lb (kg) Open; Cab 3960 ; 4064 kg
8480 ; 9780 lb

MFWD Dimensions

Wheelbase, in. (mm) 2450 mm
96.5 in.
Front Tread Range, in. (mm) 1523-2033 mm
60.0-80.0 in.
Front Axle Clearance, in. (mm) 457 mm
18 in.
Turning Radius w/Brakes, ft (m)
Turning Radius w/o Brakes, ft (m)
Limited Slip Differential Yes
Unballasted Operating Weight, lb (kg)
Approx. Ship Wgt, lb (kg) Open; Cab 4268; 4645 kg
9410; 10,240 lb

4WD Dimensions

Wheelbase, in. (mm) 2450 mm
96.5 in.
Wheel Tread, Min. to Max. in. (mm)
Turning Radius w/o Brakes, ft (m)
Nebraska Test Unballasted w/Duals, lb (kg)
Unballasted Weight, lb (kg)

Standard Tires

2WD Front
10.00-16 in. 8PR F2 BiasRear
460/85R38 in. 8PR R1W Radial
MFWD Front
380/85R24 in. 8PR R1W RadialRear
460/85R38 in. 8PR R1W Radial
4WD
Track widths

Miscellaneous

Country of Manufacture Saltillo, Mexico
Ballasting Restrictions, lb (kg) Refer to operator's manual
*Notes Updated - 1 August 2015