6135HF485 13.5L Generator Drive Engine

6135HF485 13.5L Generator Drive Engine

Overview

  • PowerTech™ Plus
  • Standby: 345-460 kW (462-616 hp) @ 1800 rpm
  • Prime: 311-419 kW (417-561 hp) @ 1800 rpm
Request A Quote
Features

Features

Expand All Collapse All

Jet fuel capable

  • The John Deere jet fuel capable engines run on military, arctic, and aviation fuel, including Jet A, Jet A-1, JP-5, and JP-8. If you need to switch back to diesel fuel, just fill up the tank and go.

4-valve cylinder head

  • The 4-valve cylinder head provides excellent airflow
  • Cross flow design

Electronic unit injectors (EUI) and engine control unit (ECU)

  • The HPCR fuel system provides variable common rail pressure, multiple injections, and higher injection pressures, up to 1,600 bar (23,000 psi). It also controls fuel injection timing and provides precise control for the start, duration, and end of injection.

Cooled exhaust gas recirculation (EGR)

  • Cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing NOx

Variable geometry turbocharger-VGT

  • Varies exhaust pressure based on load and speed to insure proper EGR flow, quicker transient response for exceptional block-loading, and best-in-class fuel economy

Air-to-air aftercooled

  • This is the most efficient method of cooling intake air to help reduce engine emissions while maintaining low-speed torque, transient response time, and peak torque. It enables an engine to meet emissions regulations with better fuel economy and the lowest installed costs

Compact size

  • Horsepower/displacement ratio is best-in-class
  • Lower installed cost
  • Mounting points are the same as Tier 2/Stage II engine models

John Deere electronic engine controls

  • Monitors critical engine functions providing warning and/or shutdown to prevent costly engine repairs;eliminates need for add-on governing components; all lowering total installed costs. Snapshot diagnostic data that can be retrieved using commonly available diagnostic service tools
  • New common wiring interface connector for vehicles or available OEM instrumentation packages; new solid conduit and "T" connectors to reduce wiring stress, greater durability and improved appearance
  • Factory installed engine mounted ECU or remote mounted ECU, wiring harness and associated components
  • Industry standard SAE J1939 interface which communicates with other vehicle systems, eliminating redundant sensors and reducing vehicle installed cost

Additional features

  • Self adjusting poly-vee fan drive
  • Either-side service
  • Low-pressure fuel system with "auto-prime" feature
  • Directed top-liner cooling
  • 500-hour oil change

Specifications

Emissions certifications

CARB
EPA Tier 3

General engine data

Model 6135HF485
Number of cylinders 6
Displacement-- L (cu in) 13.5 (824)
Bore and Stroke-- mm (in) 132 x 165 (5.20 x 6.50)
Compression Ratio 16.0:1
Engine Type In-line, 4-Cycle
Aspiration Turbocharged and air-to-air aftercooled
Length - mm (in) 1334 (52.5)
Width-- mm (in) 855 (33.7)
Height-- mm (in) 1512 (59.5)
Weight, dry - kg (lb) 1493 (3291)

Performance data range

Hz (rpm) 60 ( 1800 )
Generator Efficiency % 90-94
Power Factor 0.8
Engine power - Prime kW 311-419
Engine power - Prime hp 417-562
Engine power - Standby kW 345-460
Engine power - Standby hp 463-617
Rated Fan Power - kW 18.98-25.3
Rated Fan Power - hp 25.5-33.9
Calculated generator set output - Prime kWe 264-372
Calculated generator set output - Prime kVA 330-465
Calculated generator set output - Standby kWe 293-409
Calculated generator set output - Standby kVA 367-511