The hydraulic windscreen on the 615P allows the operator to maximize productivity by controlling the crop flow in changing windrow conditions.
The hydraulic windscreen utilizes double-acting cylinders which react quicker in maximizing the control of the crop. The windscreen is controlled by the fore-and-aft control on the combine hydro handle. A benefit is the header backshaft speed can be controlled independently of the windscreen allowing for increased belt pickup, and auger/feederhouse chain speed for tough windrow conditions.
The 615P features a dual-belt draper to enhance material flow into the combine when harvesting windrows.
The transfer belts move crop under the 66-cm (26-in.) diameter auger. This provides significant material handling advantages in large/dense windrows.
The 615P features 4.5-m (178-in.) wide belts for enhanced belt tracking with reduced seed loss.
Connectors between belts improve belt-drive capacity in tough windrow conditions without the need for a center support on the drive rollers. This design eliminates roller flanges which would create a gap between belts and could result in crop losses. The heavy-duty 615P belts are designed for maximum wear life.
The 615P features a belt tensioning system for extended belt and roller life.
The exclusive FieldGlide suspension system features an adjustable air spring and heavy-duty hydraulic shock design to dampen movement during field operation, allowing the operator to increase harvesting speed. Once set, the air springs do not need adjustment during the season.
Adjustment of the air springs requires no tools and is simple compared to other belt pickup suspensions. Adjust the air springs according to instructions located on the belt pickup side sheets.
|Transport widths||5,438 mm
|Header height control||Hydraulic|
|Width of belts||1,130 mm
|Number of belts per pickup||4 picking, 4 transfer|
|Total picking width||4,546 mm
|Operating speed of belts||3-150 m/min
|Number of rollers||2 picking, 2 transfer|
|Number of fingers per belt||84|
|Float range||57 mm
|Auger fingers||Heavy-duty, round, diameter with breakaway notch 15.9 mm
|Number of auger fingers||19 STS, maximum 22|
|Auger finger pattern||In-line, retracting|
|Finger reach||152 mm
|Operating speed||At 520 feederhouse speed 180 rpm|
|Pressure||1 bar 103.4 kPa
|Approximate shipping weight (includes shipping skids)||1,520 kg