6195M Tractor

6195M Tractor


  • 195-hp John Deere FT4 PowerTech™ engine
  • 30 gpm pressure-flow compensated hydraulic system
  • Multiple transmission options
Request A Quote
Online Brochures


Official Test

Nebraska Test number


Manufacturer John Deere PowerTech? PSS (B20 Diesel Compatible)
Engine family
Aspiration Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation
Cylinders/Displacement, cu. in. (L) 6/6.8 L
6/414 cu in.
Cylinder Liners Wet sleeve
Fuel tank capacity, US Gal. (L) (Open; Cab) Standard
340 L
90 U.S. gal.
Underhood muffler Yes


Advertised PTO hp (kW) @ Rated rpm 117 @ 2100 kW
158 @ 2100 hp
Official PTO hp (kW) @ Rated rpm
Advertised Engine hp (kW) @ Rated speed 145 @ 2100 kW
195 @ 2100 hp
Max Unballast Drwbr hp (kW) @ Eng rpm
Maximum Torque (PTO) @ rpm, lb-ft (Nm)
Max Torque Rise (80% rtd spd) @ Eng rpm
Maximum Torque Rise % (PTO) @ Eng rpm

Fuel Use, U.S. gal./hr & hp hr/gal. at:

PTO @ Rated Eng rpm
Standard PTO Speed @ Eng speed
Maximum PTO Power @ Eng rpm
Maximum Engine Power @ Eng rpm
Max Unballasted Drawbar Power @ Eng rpm
75% Load, Full Engine rpm (Unballasted)
75% Load @ Reduced rpm (Unballasted)


Std. Transmission; Forward/Reverse 16 Speed PowrQuad PLUS? Transmission 30K (Cab Only)
Opt. Transmission; Forward/Reverse 20 Speed PowrQuad PLUS Transmission 40K (Cab Only); 20 Speed AutoQuad PLUS? Transmission 40K (Cab Only)
Reverser Left-hand base
On-the-Go Shifting (Yes/No/Partial) Yes
Clutch; Wet/Dry Wet
Creeper Yes

Power Take-Off (PTO)

Standard Independent 1-3/8 in., 540/1000 reversible shaft
Optional Independent 540 rpm
PTO Speeds @ Engine rpm
PTO Actuation Electrohydraulic


Type Pressure & Flow Compensated (PFC) System with Load Sensing Function
Pump Rated Output, GPM (L/min.) Standard
114 L/min
30 gpm
Rated Flow @ One SCV, GPM (L/min.)
Max Output @ SCV Couplers, GPM (L/min.)
Maximum Operating Pressure, psi (kPa) 20,000 kPa
2900 psi
Maximum Hydraulic Power, hp (kW)
Hitch Draft Control Load Sense Type Electrohydraulic
Remote Control Valves Available Up to 3 rear mechanical or 3 with power beyond, 3 mid-mount mechanical
Hitch Category (SAE Designation) Category 2/3N
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. Standard
4852 Advertised kg
10696 Advertised lb
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)
Sensing type Electronic lower link
Joystick SCV control Mechanical

Final Drive

Type Inboard planetary three pinion
Differential controls Electrohydraulic
Availability Front
YesFront & Rear
Engage On-the-Go Rear Differential Lock Yes
Axle Type Rack and Pinion 100 length in.
Brakes, Type and Control Hydraulic wet disk

Operator Station

Rollover Protective Structure, OOS Gearshift Location - Console/Floor
Transmission specific

2WD Dimensions

Wheelbase, in. (mm) 2800 mm
110.2 in.
Front Tread Range, in. (mm) 1610 to 2220 mm
63.3 to 87.4 in.
Rear Tread Range, in. (mm)
Minimum Rear Tread Setting, in. (mm)
Front Axle Clearance, in. (mm)
Turning Radius w/Brakes, ft (m)
Turning Radius w/o Brakes, ft (m)
Unballasted Operating Weight, lb (kg)
Approx. Ship Wgt, lb (kg) Open; Cab

MFWD Dimensions

Wheelbase, in. (mm) 2800 mm
110.2 in.
Front Tread Range, in. (mm) 1494 to 2206 mm
58.8 to 86.8 in.
Front Axle Clearance, in. (mm) 607 mm
23.9 in.
Turning Radius w/Brakes, ft (m) 7.1 m
23.5 ft
Turning Radius w/o Brakes, ft (m) 7.1 m
23.5 ft
Limited Slip Differential Yes
Unballasted Operating Weight, lb (kg) 7105 kg
15664 lb
Approx. Ship Wgt, lb (kg) Open; Cab 7105 kg
15664 lb

4WD Dimensions

Wheelbase, in. (mm)
Wheel Tread, Min. to Max. in. (mm)
Turning Radius w/o Brakes, ft (m)
Nebraska Test Unballasted w/Duals, lb (kg)
Unballasted Weight, lb (kg)

Standard Tires

MFWD Front
380/85R34 137A8 R1W Radial in.Rear
480/80R46 158A8 R1W Radial in.
Track widths


Country of Manufacture Mannheim, Germany
Ballasting Restrictions, lb (kg) Refer to Operator's Manual
*Notes Updated - 09/22/2016