625D Draper

625D Draper

Overview

  • Windrowing capability with 600D Drapers
  • Double-cut knife system produces a cleaner cut
  • Dual-knife drive system is timed
  • Cutterbar is closer to the ground
Request A Quote
Features

Features

Expand All Collapse All

Double-cut knife system produces a cleaner cut

All John Deere 600D Drapers include a double-cut knife which features a hydraulic tilt that is controlled from inside the cab. All 10.6-m (35-ft) and 12.1-m (40-ft) draper cutterbars also have knifeback reinforcement straps to strengthen the knifeback.

 

Customer Value:

  • Longer stroke of knife section provides a faster, cleaner, and smoother cut which allows operators to harvest at faster ground speeds maximizing productivity
  • Reinforced knifeback strengthens cutterbar for tough harvesting conditions maximizing performance
  • Hardened sickle sections and unique boron treatment extends wear life
  • Hydraulic tilt optimizes the cutterbar angle for varying conditions, extending the harvest day and providing the lowest-possible cut height
Double-cut cutterbar system Double-cut cutterbar system
Double-cut rock guard Double-cut rock guard
Theory of Operation:

The 100-mm (4-in.) cutting action produces a cleaner cut versus the tearing effect of shorter-stroke cutting systems. Knife hold-downs are easily adjusted to help maintain harvesting performance.

Tilt cylinder Tilt cylinder
#

 

The cutterbar hydraulic tilt adjusts a full 8 degrees while maintaining excellent visibility to the cutterbar throughout the tilt range. For improved ease of use the optional advanced hydro handle can be configured to control the platform tilt.

Dual-knife drive system is timed

Cutterbar epicyclical gearcase Cutterbar epicyclical gearcase
Knife drive shaft Knife drive shaft

The unique dual-knife-drive system is timed, creating the smoothest-possible reciprocating knife-drive system currently in the industry. The positive, reliable shaft-driven dual epicyclical in-line knife drives with built-in driveline protection provide operators with the strongest knife-drive system.

Quickly transport 625 Draper from field to field

Transport system Transport system
#

Although an integrated transport is not available for the 625D Draper, there is still a solution to move the 625D from field to field quickly. This solution is the HT12 Header Transport from Frontier™ products.

 

Key features of this equipment are as follows:

  • Rear axle brakes 
  • Rear torsion flex axle 
  • Adjustable sliding brackets 

Reel resume and reverse are features on the 600D Drapers

Reel resume and reverse are features on the 600D Drapers. The combine operator can store two different reel positions with one setting for normal conditions and another for down, tangled, short, leaning crops. 

 

Customer Value:

  • Added time savings and convenience with saved reel positions, lowering operator fatigue
  • Reel-reverse feature reverses the reel in conjunction with the center feed drum and belt to back out plugs and increase harvest efficiency
Draper drum Draper drum
Draper reel Draper reel

Specifications

Cutterbar

Type Straight line knife drive system
Length 7.8 m
25.5 ft
Knife drive Base single, optional dual knife (combine use only)
Base dual knife (SPW only or SPW/combine combination use)
Knife speed 490 cycles/min
1,040 spm
Cutterbar tilt Base Hydraulic, 9 degrees tilt maximum

Pickup reel

Number of slats 6 bat poly base
8 bat steel optional (for forage conditions)
Fingers Nylon (steel optional, typically used in rice or forage conditions)
Diameter 1,067 mm
42 in.
For rice or forage conditions 1,371 mm
54 in.
Height control Hydraulic
Speed control Hydraulic
Reel lift Cylinder stroke 330 mm
13 in.
Total range 391.5 mm
15.4 in.
Reel fore and aft Cylinder stroke 359 mm
14.1 in.
Total range 620 mm
24.4 in.
Reel resume Base
Reel reverse Base
Operating speeds 6-54 rpm
Operating speeds (54-in. reel) 5-44 rpm

Slat reel

Number of slats
Diameter
Height control
Speed control
Operating speeds

Draper belts

Width 0.7 L
24 oz
rubber coated polyester with V-Guide tracking
Side belts 1,016 mm
40 in.
Center belts 1,397 mm
55 in.
Center belt not included with SPW configuration
Clean height 25.4 mm
1 in.
Operating speed Side belts: variable up to 223 m/min
735 fpm
Center belts: 212 m/min
695 fpm
Center belt not included with SPW configuration
Speed control Hydraulic from cab
Center belt reverse Base; Center belt not included with SPW configuration

Feed drum

Diameter 406 mm
16 in.
Feed drum not included with SPW configuration
Feed drum fingers Steel heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer
Number of fingers 18
Auger finger platform Dual chevron, retracting
Finger reach 152 mm
6 in.
Drum/auger reverse Base
Operating speed 195 rpm
Center clean out door Base

Header height sensing

Type Electro-hydraulic base
Header height sensing on the ground Base
Header height sensing off the ground

Auxiliary top auger

Type Optional hydraulic drive

Dimensions

Platform length 8.5 m
27.9 ft
Overall operating depth 2.4 m
7.9 ft
Transport width, field position 8.1 m
26.5 ft
Transport width on wheel, less dividers
Transport length, hitch extended

Weight

Approximate weight (slat reel)
Approximate weight (pickup reel) Combine only 2,884 kg
6,359 lb
SPW only 2,284 kg
5,036 lb
Approximate weight (with transport)
Approximate weight (optional 54-in. reel) Combine only 2,974 kg
6,556 lb
SPW only 2,374 kg
5,234 lb

Additional information

Date collected