7200A PrecisionCut™ Trim & Surrounds Mower

7200A PrecisionCut™  Trim & Surrounds Mower

Overview

  • TechControl™ Display locks in performance, and uptime
  • LoadMatch™ to maintain cut quality
  • 35% larger traction drive, 17% larger wheel motor displacement
  • Reach trimming system for bunkers
Request A Quote
Online Brochures

Specifications

Engine

Type In-Direct Inject Diesel
Compliant emission regulation
Horsepower Maximum rated horsepower
At 2600 rpm: 15.8 kW
21.2 hp
Cylinders 3
Displacement 1.267 L
77.32 cu in.
Air cleaner 2-stage dry element
Fuel Diesel
Cooling system Liquid centrifugal pump; forward machine location for optimum cooling

Vehicle

Traction drive
Drive pump Gear
Cutting units drive
Hydraulic system capacity 45.4 L
12 U.S. gal.
Fuel tank capacity 45.4 L
12 U.S. gal.
Steering Tilt; Hydraulic power with double acting steering cylinder
Front drive tires 24 x 12 - 12 turf trac
Steering tires 24 x 12 - 12 multi trac
Ground pressure 96.5 kPa
14 psi
Brakes Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
ROPS Standard; meets ISO 21299 Standard

Operating weight

Cutting units lowered 1039 kg
2290 lb

Controls

Throttle Hand throttle
Forward/reverse
Mower lift One-touch single handle
Parking brake Electric Switch on CommandArm for Internal Wet Disk Brakes
Seat Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
PTO Electric Switch on Command Arm
Ignition Key start
Work lights Switch on Command Arm
Tilt steering Left foot operated for easy adjustment
Operator display
Storage Cup holder; two-way radio; large operator storage located on left hand side of operator station

Dimensions

Height with ROPS 213.4 cm
84 in.
Length 338 cm
133 in.
Transport width 173 cm
68 in.
Mowing position width
Wheelbase 157.5 cm
62 in.
Ground speed Mowing
0-10 km/h
0-6 mphTransport
0-14 km/h
0-9 mphReverse
0-6.4 km/h
0-5 mph

Cutting Units

Number 3 reel cutting units
Size Quick Adjust QA7: 66 cm
26 in.
or QA7: 76 cm
30 in.
Total width of cut
Height of cut Construction
Five or eight blades
Frequency of clip (FOC Reels) or Blade tip speed (decks) Rollers
Optional: grooved, solid, or spiral: 7.5 cm
3 in.
Eight Blade: 1.99 mm/km/h
0.126 in./mph
Five Blade: 3.17 mm/km/h
0.201 in./mph
Reel diameter 17.8 cm
7 in.
Bedknife adjustment Reel-to-bedknife
Backlapping Standard

Sound levels

Operator ear full engine 87 +/- 1 dBA
Operator ear reduced engine rpm (2300 rpm)
Measuring standard ISO 11201, EN ISO5395-1
Attachments installed FTCs, reels engaged

Fuel economy

Actual fuel usage will vary depending on course conditions, operation, turf and fuel quality 25% load: 1.74 L/hr
0.46 gph
40% load 2.65 L/hr
0.7 gph
50% load: 3.03 L/hr
0.8 gph

Warranty

Type Two-year limited

Certification

Type ANSI B71.4-2012, CE

Additional information

Date collected