8370RT Tractor

8370RT Tractor

Overview

  • 370 Engine hp
  • John Deere PowerTech™ 9.0L PSS
  • Choice of e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
  • New cab suspension system and CommandView™ III cab and Generation 4 CommandCenter™
Build your own
Online Brochures

Specifications

Official Test

Nebraska Test number TBD Nebraska Test

Engine

Manufacturer John Deere
Engine family 9.0L: EJDXL09.0301
Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Cylinders/Displacement, cu. in. (L) 6 cylinders/9.0 L
549 cu in.
Cylinder Liners Wet
Fuel tank capacity, US Gal. (L) (Open; Cab) Standard
758 L
200 gal.
Underhood muffler

Performance

Advertised PTO hp (kW) @ Rated rpm At 2100 per SAE: 229 kW
308 hp
Official PTO hp (kW) @ Rated rpm
Advertised Engine hp (kW) @ Rated speed At 2100 per 97/68EC PS: 272 kW
370 hp
Max Unballast Drwbr hp (kW) @ Eng rpm
Maximum Torque (PTO) @ rpm, lb-ft (Nm)
Max Torque Rise (80% rtd spd) @ Eng rpm
Maximum Torque Rise % (PTO) @ Eng rpm

Fuel Use, U.S. gal./hr & hp hr/gal. at:

PTO @ Rated Eng rpm
Standard PTO Speed @ Eng speed
Maximum PTO Power @ Eng rpm
Maximum Engine Power @ Eng rpm
Max Unballasted Drawbar Power @ Eng rpm
75% Load, Full Engine rpm (Unballasted)
75% Load @ Reduced rpm (Unballasted)

Transmission

Std. Transmission; Forward/Reverse IVT
Opt. Transmission; Forward/Reverse
Reverser Left-hand or Right-hand
On-the-Go Shifting (Yes/No/Partial) Yes
Clutch; Wet/Dry Wet
Creeper IVT

Power Take-Off (PTO)

Standard 45 mm
1.75 in.
20 spline, 1000 rpm
Optional
PTO Speeds @ Engine rpm At 2000 rpm: 1000 rpm
PTO Actuation Electrohydraulic

Hydraulics

Type Closed-center, pressure/flow compensated
Pump Rated Output, GPM (L/min.) Standard
227.1 L/min
60 gpm
Rated Flow @ One SCV, GPM (L/min.) Rear coupler: 12.7 mm
0.5 in.
132 L/min
35 gpm
Rear coupler: 19.1 mm
0.75 in.
153 L/min
40.5 gpm
Max Output @ SCV Couplers, GPM (L/min.)
Maximum Operating Pressure, psi (kPa) 20,400 (+ or - 300) kPa
2958 psi
Maximum Hydraulic Power, hp (kW)
Hitch Draft Control Load Sense Type Electronic
Remote Control Valves Available Standard: four
Optional: five or six
Hitch Category (SAE Designation) Category 4N/3
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. Standard
Category 4N/3: 6803 kg
15,000 lbOptional
Category 4N/3: 9,702 kg
20,000 lb
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)
Sensing type Electrohydraulic
Joystick SCV control Electrohydraulic optional

Final Drive

Type Inboard planetary
Differential controls
Availability
Engage On-the-Go Rear Differential Lock Yes
Axle Type Bar
Brakes, Type and Control Hydraulic wet disc

Operator Station

Rollover Protective Structure, OOS Gearshift Location - Console/Floor
CommandARM
Cab Doors
left handPlatform - Flat/Straddle
FlatSeat Suspension System
Air standard

2WD Dimensions

Wheelbase, in. (mm)
Front Tread Range, in. (mm)
Rear Tread Range, in. (mm)
Minimum Rear Tread Setting, in. (mm)
Front Axle Clearance, in. (mm)
Turning Radius w/Brakes, ft (m)
Turning Radius w/o Brakes, ft (m)
Unballasted Operating Weight, lb (kg)
Approx. Ship Wgt, lb (kg) Open; Cab

MFWD Dimensions

Wheelbase, in. (mm)
Front Tread Range, in. (mm)
Front Axle Clearance, in. (mm)
Turning Radius w/Brakes, ft (m)
Turning Radius w/o Brakes, ft (m)
Limited Slip Differential
Unballasted Operating Weight, lb (kg)
Approx. Ship Wgt, lb (kg) Open; Cab

4WD Dimensions

Wheelbase, in. (mm) 2515 mm
99 in.
Wheel Tread, Min. to Max. in. (mm) Standard: 1829-3048 mm
72-120 in.
Optional: 2845-4064 mm
112-160 in.
Turning Radius w/o Brakes, ft (m)
Nebraska Test Unballasted w/Duals, lb (kg)
Unballasted Weight, lb (kg) IVT with: fuel, 113.6 L
30 gal.
Tracks: 635 mm
25 in.
No weights: 16578 kg
36549 lb

Standard Tires

2WD
MFWD
4WD
Track widths Standard: 635 mm
25 in.
Optional: 406 mm
16 in.
457 mm
18 in.
610 mm
24 in.
762 mm
30 in.

Miscellaneous

Country of Manufacture Waterloo, IA USA
Ballasting Restrictions, lb (kg) Refer to operator's manual
*Notes