913 V-Ripper

913 V-Ripper

Overview

  • Adjustable standard spacing prevents side movement
  • V-pattern frame promotes leading-edge shattering
  • LaserRip™ Extreme points
  • Heavy-duty steel ripper points
Request A Quote
Online Brochures
Features

Features

Expand All Collapse All

Soil probe helps to determine proper operating depth

Soil probe Soil probe
#

The soil probe helps operators to determine the proper operating depth of their ripper points,
38 mm (1.5 in.) below the bottom of the compaction layer.

The probe allows obtaining the maximum amount of soil fracturing from the entire family of John Deere ripper points. Marked in 51-mm (2-in.) increments from 254 mm to 559 mm (10 in. to 22 in.), the probe provides accurate feedback of compaction layer depth.

 

It is stored on the mainframe of the ripper for convenient access. The operator's manual explains the proper use of the soil probe.

Strong V-pattern frame promotes leading-edge shattering of center shank and material flow

913 V-Ripper 913 V-Ripper
#

The frame design of the 913 V-Ripper positions the standards in a V pattern:

  • Promotes leading-edge shattering of the center shank and material flow through the machine

The 127-mm x 178-mm (5-in. x 7-in.) cross-section frame has 10-mm (3/8-in.) thick walls:

  • Provides strength to handle tractors of up to 150 power take-off (PTO) horsepower
  • Same frame-size tubing as non-expandable 915 V-Ripper
  • Parking stands are included in base equipment

Two-position integral hitch to meet operator requirements

Low and high positions on 3-point mast Low and high positions on 3-point mast
#

3-point hitch hookup is for Category 2 or 3N tractors.

 

The integral hitch can be set to two positions:

  • 1 = Low position
    Gives maximum transport clearance and allows ripping to approximately 508 mm (20 in.) deep with the 838-mm (33-in.) standards.
  • 2 = High position
    Enables ripping to a maximum depth of 584 mm (23 in.) deep with the 838-mm (33-in.) standards.

Specifications

Tool configuration

Type V-ripper
Option 1 3-standard, 20-in. spacing
Option 2 3-standard, 25-in. spacing
Option 3 3-standard, 30-in. spacing
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22

Working width

Option 1 8, 4 ft, in.
Option 2 10, 5 ft, in.
Option 3 12, 6 ft, in.
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22

Transport width

Option 1 7 ft
Option 2 7 ft
Option 3 7 ft
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22

Operating depth

Maximum 23 in.

Frame

Size
Maximum underframe clearance

Operating speed

Miles per hour

Horsepower required

Horsepower per standard

Depth control

Option 1 Intergral units are controlled by tractor, rockshaft, and gauge wheels
Option 2
Option 3

Hydraulic requirements

Option 1
Option 2

Hitch

Options Intergral
Three-point hitch requirements Cat 2 or 3N with Quick Coupler; Cat 3N without Quick-Coupler
Pull-type description

Standard options

Spacings 20, 25, 30 in.
Option 1 Trip force
12,000 lbStandard type
Straight or parabolic with wear shin
Shear-bolt
Option 2 Trip force
5600 lbStandard type
Straight with wear shin or parabolic
Safety-trip
Option 3 Trip force
5300 lbStandard type
Straight with wear shin or parabolic
Cushion-trip
Option 4 Trip force
3200 - 5300 lbStandard type
Parabolic
Spring-reset rock standard

Ground-engaging components

Options 2.25-in.point, 2.25-in. chrome single or double carbide cap; 2-3/4-in. (70 mm), 5-in. (127 mm), 7-in. (178 mm) LaserRip points optional.or 10-in. (254 mm)

Coulters

Description
Type
Pounds of force
Blades

Closing wheel attachment

Description
Down force
Size
Spacing
Angle adjustments

Stabilizer/gauge wheels

Type
Wheels
Tires

Pull-type wheels

Description
Additional feature
Option 1
Option 2
Option 3
Option 4

Additional information

Date collected