All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.
The H-Series Loaders are designed for easy removal and mounting to and from the tractor without tools.
The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.
The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.
To view a video of how the Quik-Park™ system works click here.
NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.
|Front tire||7.00-14 6PR R1|
|Rear tire||11.2-24 6PR R1|
|Front axle configuration|
|Pump capacity||8.6 gpm|
|Rated pressure||2500 psi|
|Bucket weight||93.8 kg
|Lift capacity at full height||Measured at pivot (U)
1360 lbfMeasured at 500 mm ahead of pivot (V)
|Lift capacity at 59 in. (1500 mm)||Measured at pivot (W)
1700 lbfMeasured at 500 mm ahead of pivot (X)
|Boom breakout force||Measured at pivot (Y)
2855 lbfMeasured at 500 mm ahead of pivot (Z)
|Bucket rollback force capacity||At maximum height (VV)
2657 lbfAt 59-in. (1500-mm) lift height (XX)
3347 lbfAt ground-level line (ZZ)
|Dimensions||Maximum lift height (A)
90 in.At full height - bucket level(B)
2123 mmAt full height - bucket dumped (C)
|Overall length (I+F), ft (m)||3.122 m
|Overall height in carry position (J)|
|Digging depth (H)||76 mm
|Reach||At maximum height (D)
30.4 in.At ground level - bucket level (F)
|Bucket angle||Dump angle, degrees (E)
43 degree (angle)Rollback angle, degrees (G)
25 degree (angle)
|Cycle times||Loader raise, seconds
2.76 secondsLoader lower, seconds
1.69 secondsBucket dump, seconds
2.91 secondsBucket rollback, seconds