H165 Loader

H165 Loader

Overview

  • Compatible with 3R Series Tractors
  • Quik-Park™ mounting system for efficient attachment and removal
  • Quik-Change attachment carrier makes it easier and faster to move from chore to chore
  • 1,122 pounds (509 kg) lift capacity
Build your own
Features

Features

Expand All Collapse All

Quik-change attachment carrier

Quik-change attachment carrier Quik-change attachment carrier

Allows fast, easy removal/mounting of attachments without tools.

 

End-of-pin lubrication means easy maintenance

Close up of grease fitting Close up of grease fitting
Pivot point grease fitting locations Pivot point grease fitting locations

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.

Quik-Park™ loader mounting system

Quik-Park loader mounting system Quik-Park loader mounting system

The H-Series Loaders are designed for easy removal and mounting to and from the tractor without tools.

The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.

The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.

To view a video of how the Quik-Park™ system works click here.

NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.

Specifications

Tractor

Model 3120/3320/3520/3720/3033R/3038R/3039R/3045R/3046R
Front tire 7.00-14 6PR R1
Rear tire 11.2-24 6PR R1
Front axle configuration
Wheelbase 1727 mm
68 in.
Pump capacity 8.6 gpm
Rated pressure 2500 psi

Loader

Leveling configuration
Bucket used
Bucket weight 93.8 kg
206.8 lb
Lift capacity at full height Measured at pivot (U)
725 kgf
1598 lbfMeasured at 500 mm ahead of pivot (V)
509 kgf
1122 lbf
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
964 kgf
2125 lbfMeasured at 500 mm ahead of pivot (X)
748 kgf
1649 lbf
Boom breakout force Measured at pivot (Y)
1509 kgf
3327 lbfMeasured at 500 mm ahead of pivot (Z)
1097 kgf
2417 lbf
Bucket rollback force capacity At maximum height (VV)
811 kgf
1787 lbfAt 59-in. (1500-mm) lift height (XX)
1349 kgf
2974 lbfAt ground-level line (ZZ)
1401 kgf
3087 lbf
Dimensions Maximum lift height (A)
2593 mm
102 in.At full height - bucket level(B)
2388 mm
94 in.At full height - bucket dumped (C)
2024 mm
79.7 in.
Overall length (I+F), ft (m) 3.207 m
10.52 ft
Overall height in carry position (J)
Digging depth (H) 143 mm
5.6 in.
Reach At maximum height (D)
562 mm
22.1 in.At ground level - bucket level (F)
1489 mm
58.6 in.
Bucket angle Dump angle, degrees (E)
41.1 degree (angle)Rollback angle, degrees (G)
31 degree (angle)
Cycle times Loader raise, seconds
3.56 secondsLoader lower, seconds
2.1 secondsBucket dump, seconds
2.96 secondsBucket rollback, seconds
1.75 seconds

Additional information

Date collected