H180 Loader

H180 Loader


  • Compatible with 4R Series Tractors and older 4 Series Tractors of similar size
  • Quik-Park™ loader mounting system for fast, easy attachment and removal
  • Quik-Change™ attachment carrier makes switching from chore to chore a snap
  • Optional skid steer attachment carrier
Request A Quote


Expand All Collapse All

Optional skid steer attachment carrier

Optional skid steer attachment carrier Optional skid steer attachment carrier

The skid steer attachment carrier is installed in place of the standard John Deere attachment carrier and allows for the use of skid steer attachments on the H180, H160, and H165 Loaders.

Skid steer attachments are available through Worksite Pro Attachments.

Quik-Park™ loader mounting system


To view a video of how the Quik-Park™ system works click here.


NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.

Quik-Park loader mounting system Quik-Park loader mounting system

The H180 Loader is designed for easy removal and mounting to and from the tractor without tools.


Parking stand Parking stand

The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.

The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the park position.

Tractor backing away Tractor backing away

Quik-change attachment carrier

Easy removal and mounting of attachments Easy removal and mounting of attachments
Close up of Quik-Change attachment mounting Close up of Quik-Change attachment mounting

Allows fast, easy removal and mounting of attachments without tools.




Model 4X20
Front tire 8.00-16 6PR R1 TI
Rear tire 13.6-28 4PR R1 TI
Front axle configuration MFWD
Wheelbase 1816 mm
71.4 in.
Pump capacity 60.2 L/min
16 gpm
Rated pressure 17.2 MPa
2500 psi


Leveling configuration Non-Self-Leveling
Bucket used Materials - 73 in.
Bucket weight 146 kg
321 lb
Lift capacity at full height Measured at pivot (U)
1128 kg
2482 lbMeasured at 500 mm ahead of pivot (V)
844 kg
1857 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
1345 kg
2959 lbMeasured at 500 mm ahead of pivot (X)
1075 kg
2365 lb
Boom breakout force Measured at pivot (Y)
1841.6 kgf
4060 lbfMeasured at 500 mm ahead of pivot (Z)
1395.5 kgf
3076 lbf
Bucket rollback force capacity At maximum height (VV)
982.3 kgf
2166 lbfAt 59-in. (1500-mm) lift height (XX)
1513.6 kgf
3337 lbfAt ground-level line (ZZ)
1614.5 kgf
3559 lbf
Dimensions Maximum lift height (A)
2820 mm
111 in.At full height - bucket level(B)
2615 mm
103 in.At full height - bucket dumped (C)
2218 mm
87 in.
Overall length (I+F), ft (m) 3.5 m
11.5 ft
Overall height in carry position (J) 1.5 m
5 ft
Digging depth (H) 119 mm
4.7 in.
Reach At maximum height (D)
751 mm
30 in.At ground level - bucket level (F)
1698 mm
67 in.
Bucket angle Dump angle, degrees (E)
47.14 degree (angle)Rollback angle, degrees (G)
42.4 degree (angle)Dump angle, ground
130 degree (angle)
Cycle times Loader raise, seconds
4.31 secondsLoader lower, seconds
3.36 secondsBucket dump, seconds
2.83 secondsBucket rollback, seconds
2.58 seconds

Additional information

Date collected