Z997R Diesel ZTrak™ Zero-Turn Mower

Z997R Diesel ZTrak™ Zero-Turn Mower

Overview

  • 37.4 HP (27.5 kW)
  • Biodiesel (B20) compatible
  • Tier 4 compliant
  • Four different deck options: 60-in side, 72-in side, 60-in MOD and 60-in rear.
Build your own
Features

Features

Expand All Collapse All

Two seat options with distinctive styling are designed for comfort

Deluxe comfort seat Deluxe comfort seat
#

Two seat options:

  • Deluxe comfort seat with armrests
  • Comfort adjust suspension seat with armrests
Deluxe comfort seat

Key features for the deluxe comfort seat include:

  • Included in base equipment
  • High back for good support
  • Wide and deep seat cushion for good support and comfort
  • Standard adjustable armrests
  • Fore-aft adjustments to accommodate all operators
  • Seat belt with retractor
Comfort adjust suspension seat
Optional suspension seat Optional suspension seat
Seat adjustment knob Seat adjustment knob

The optional suspension seat provides the operator with an enjoyable ride by allowing the operator the ability to adjust the seat to their preference. The fore-aft seat adjustment allows the operator the ability to choose the leg room needed. The ride comfort knob adjusts vertical suspension for a firm or soft ride.
 
Key features include:

  • High back for good support
  • Suspension seat with standard adjustable armrests
  • Seat suspension knob adjustable for different operators
  • Fore-aft adjustments to accommodate all operators
  • Seat belt with retractor

Standard operator comfort and convenience package for ease of use

Comfort and convenience handles Comfort and convenience handles

The comfort and convenience package includes large, ergonomically angled control levers with specially padded grips and built-in electronic controls to raise or lower the mower deck and disengage the mower blades.

Control buttons Control buttons

The push button (A) on the left motion control lever raises the mower deck. The push button (B) on the right-hand control lever shuts off the power take-off (PTO).

 

Once the PTO has been shut off using the button, the PTO switch must be pushed down and pulled up again to engage the PTO.

Easily accessed daily service points mean less maintenance time and more working time

Easy serviceability Easy serviceability
Rear hood open Rear hood open

Service components are easy to see and access:

  • Open engine compartment allows full access to engine components and service points.
  • Engine heat is kept away from the operator.
  • Flip-up seat allows easy access to the hydraulic system.
  • Flip-out floor panel allows easy access to deck spindles.
Hood latch and hood pivots
Hood latch Hood latch
Hood opened for access to service points Hood opened for access to service points

Hood has one central over-center type latch.

 

The hood pivots to make the hood easier to remove and install for ease of servicing the engine.

Coolant reserve tank and oil filter Coolant reserve tank and oil filter
Flip-up deck service panel Flip-up deck service panel

Powerful diesel engine for increased performance

Three-cylinder diesel engine Three-cylinder diesel engine
Convenient access to engine Convenient access to engine

The Z997R is powered by a three-cylinder, liquid-cooled diesel engine with a gross 37.4 hp (27.5 kW) that meets U.S. Environmental Protection Agency (EPA) Final Tier 4 emission standards.

The three-cylinder diesel engine features low noise levels, superior fuel economy, and a high torque reserve that provides plenty of power and performance.

Key features of the engine include:

  • Economical, cast-in block cylinder design gives good cooling and long life.
  • Liquid-cooled design provides more consistent operating temperatures than air-cooled.
  • Direct fuel injection is provided. 
    • Injects fuel directly on top of pistons for more efficient combustion
    • Develops more horsepower per gallon of fuel
    • Improves starting
  • Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat-transfer characteristics.
    • Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by fuel and noise from the piston slap
    • Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste and increase combustion efficiency
  • Timing gears and injector drive gears utilize helical profile gears to help lower engine noise.
    • Gear teeth have a newly designed ''roll-off'' profile, giving almost no clash, no noise, and no backlash
  • Fuel filter with replaceable element is provided.
  • Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C).
  • Auto-bleed fuel system gives extra convenience. 
    • No need to prime the system if the unit runs out of fuel; the system will self-prime the injection pump, lines and injectors, providing fast fuel recovery
  • Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off.
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap.
  • Sealed radiator compartment keeps trash and debris on outside of hood.
  • Dual-element, dry-type air cleaner with safety element and air service indicator is provided. 
    • Dual-element design for added engine protection
    • Easy to service
    • Completely sealed for effective cleaning and 90 to 95 percent of dirt ejected before it reaches the paper element
    • Secondary safety element for additional filtering
    • Air-restriction indicator to let operator know when the filter needs servicing
  • Full-pressure lubrication with full-flow filter lengthens engine life. 
    • Engine wear reduced by ensuring proper lubrication, even when operating on hillsides or uneven terrain
    • Oil filter helps keep oil clean for increased engine life
  • Automotive-type alternator (75 amp) provides plenty of charge to the battery.
  • Rear-mounted, covered radiator and fan keeps noise away from the operator and is easy to service.
  • Isolated engine mounting reduces engine vibration at operator's station for more comfortable operation.

Four mower deck options for the Z997R give superior performance in every application

Z997R shown with 60-in. (152-cm) 7-Iron PRO Mulch On Demand (MOD) mower deck Z997R shown with 60-in. (152-cm) 7-Iron PRO Mulch On Demand (MOD) mower deck
Z997R shown with 72-in. (183-cm) 7-Iron PRO side-discharge mower Z997R shown with 72-in. (183-cm) 7-Iron PRO side-discharge mower

There are four mower-deck options available for the Z997R Diesel ZTrak Mower:

  • The 60-in. (152-cm) 7-Iron™ PRO side-discharge deck is suited to a variety of mowing jobs, including trimming and grooming.
  • The 60-in. (152-cm) 7-Iron PRO Mulch On Demand™ (MOD) mower deck can be converted from a wide-open, side-discharge mode to a fully chambered mulching mode with a single move of a lever.
  • The 60-in. (152-cm) rear-discharge mower deck is fabricated from 7-gauge, 0.179-in. (4.5-mm) steel for added deck strength and long life. It is ideally suited for areas where people are present.
  • The 72-in. (183-cm) 7-Iron PRO side-discharge deck is suited to a variety of mowing jobs, including trimming and grooming on larger properties.
Spindle housings are made of ductile cast iron for extra durability
Cast-iron mower spindle Cast-iron mower spindle
Cast-iron mower spindle Cast-iron mower spindle

On every commercial mower deck, there are three 1-in. (25-mm) spindles that are cold-forged and heat-treated for strength. Spindles are supported by precision ball bearings that provide great performance and reliability.

The blade spindles are designed for many hours of trouble-free operation:

  • The spindle housings are made of ductile cast iron and have a gusseted design that puts the reinforcement where it is needed.
  • Ductile cast-iron material provides increased impact strength.
  • Strength of cast iron protects against damage from blade impacts.
  • Grease fitting is mounted at the top for easy access.
  • Grease pressure-relief valve minimizes seal damage from overfilling with grease and keeps debris from entering housing.
  • The 8-in. (20.3-cm) diameter housing distributes loads and impacts to minimize deck-shell damage.
  • Spindle assembly can be rebuilt.
60-in. (152-cm) 7-Iron PRO mower deck
60 in. (152-cm) 7-Iron PRO mower deck shown 60 in. (152-cm) 7-Iron PRO mower deck shown
#

Features include:

  • Higher blade tip speed - 18,000 fpm (5486 m/min) gives more blade strikes per distance of forward travel.
  • Front baffle is designed to better manage airflow and control clippings.
  • Ductile cast-iron blade-spindle housings have a gusseted design for extra reinforcement.
  • Spindle-pocket reinforcement for even greater structural durability.
  • A raised discharge chute provides even clipping distribution.
  • 7-gauge, 0.179-in. (4.5-mm) steel construction gives commercial durability.
  • 3-spindle design provides a smooth, even cut.
  • Plastic discharge deflector reduces damage to foliage and resists bending.
  • Formed, steel-deck design is stamped from a single sheet of steel to eliminate corners where grass can collect.
  • Deep deck gives increased vacuum action that reduces dropped clippings.
  • Shaft drive from engine to mower gives excellent reliability.
  • Belt drive efficiently transfers power from gearbox to spindles.
  • Spindle zerks are greasable from the top.
  • Quick-change cutting-height adjustment is easy to use.
  • Tricycler™ mulching kits are available.
  • Blade overlap of 1.57 in. (40 mm), nearly 0.79 in. (20 mm) greater than previous decks, reduces the number of missed grass blades.

 

  60-in. (152-cm)
Side-Discharge
60-in. (152-cm)
Side-Discharge Mulch on Demand
60-in. (152-cm)
Rear-Discharge

72-in. (183-cm)
Side-Discharge

Mower type 7-Iron™ II - stamped deck 7-Iron II - stamped deck 7-gauge fabricated deck 7-Iron II - stamped deck
Mower compatibility:        
     Discharge Side Side Rear

Side

     Mulching capability Optional field-installed kit Standard Mulch on Demand included Not available Optional field-installed kit
     Cut-height range

1.5-5 in. (3.8-12.7 cm)
0.25 in. (1.3-cm) increments

1.5-5 in. (3.8-12.7 cm)
0.25 in. (1.3-cm) increments

1.5-5 in. (3.8-12.7 cm)
0.25 in. (1.3-cm) increments

1.5-5 in. (3.8-12.7 cm)
0.25 in. (1.3-cm) increments

     Cutting width 60 in. (152 cm) 60 in. (152 cm) 60 in. (152 cm) 72 in. (183 cm)
     Height-of-cut adjustment Turning knob with foot assist Turning knob with foot assist Turning knob with foot assist Turning knob with foot assist
High lift blades:        
     Blade length 21 in. (53 cm) 21 in. (53 cm) 21 in. (53 cm) 25 in. (64 cm)
     Blade width 3 in. (7.6 cm) 3 in. (7.6 cm) 3 in. (7.6 cm) 3 in. (7.6 cm)
     Blade thickness 0.25 in. (6.35 mm) 0.25 in. (6.35 mm) 0.25 in. (6.35 mm) 0.25 in. (6.35 mm)
     Blade tip speed 17,480 fpm (5.3 km/m) 17,480 fpm (5.3 km/m) 17,480 fpm (5.3 km/m) 17,500 fpm (5.3 km/m)
     Number of blades Three Three Three Three
Blade spindles:        
     Bearings Grade=ABEC-1 Grade=ABEC-1 Grade=ABEC-1 Grade=ABEC-1
     Spindles Cold-forged and heat-treated Cold-forged and heat-treated Cold-forged and heat-treated Cold-forged and heat-treated
     Spindle housings Ductile cast-iron Ductile cast-iron Ductile cast-iron Ductile cast-iron
Wheels:        
     Front anti-scalp rollers Standard Standard Standard Standard
     Rear anti-scalp rollers Standard Standard Standard

Standard

Deck construction One-piece stamped steel One-piece stamped steel Fabricated steel One-piece stamped steel
Deck thickness 7-gauge steel
0.179 in. (4.5 mm)

7-gauge steel
0.179 in. (4.5 mm)

7-gauge steel
0.179 in. (4.5 mm), top and side

7-gauge steel
0.179 in. (4.5 mm)

NOTE: The 60-in. (152-cm) 7-Iron PRO MOD mower deck is not available in Australia/New Zealand.

72-in. (183-cm) 7-Iron PRO mower deck
Z997R with 72-in. (183-cm) 7-Iron PRO mower Z997R with 72-in. (183-cm) 7-Iron PRO mower
72-in. (183-cm) 7-Iron PRO mower deck 72-in. (183-cm) 7-Iron PRO mower deck

Features include:

  • Higher blade tip speed - 18,000 fpm (5486 m/min) gives more blade strikes per distance of forward travel.
  • Front baffle is designed to manage airflow and control clippings.
  • Spindle pocket reinforcement gives greater structural durability.
  • Ductile cast-iron blade-spindle housings have a gusseted design for extra reinforcement.
  • A raised discharge chute provides even clipping distribution.
  • 7-gauge, 0.179-in. (4.5-mm) steel construction gives commercial durability.
  • 3-spindle design gives a smooth, even cut.
  • Plastic discharge deflector reduces damage to foliage and resists bending.
  • Formed, steel-deck design is stamped from a single sheet of steel to eliminate corners where grass can collect.
  • Deep deck gives increased vacuum action that reduces dropped clippings.
  • Shaft drive from engine to mower gives excellent reliability.
  • Belt drive efficiently transfers power from gearbox to spindles.
  • Spindle zerks are greasable from the top.
  • Quick-change cutting-height adjustment is easy to use.
  • Tricycler mulching kits are available.
  • Blade overlap of 1.57 in. (40 mm), nearly 0.79 in. (20 mm) greater than previous decks, reduces the number of missed grass blades.
60-in. (152-cm) 7-Iron PRO MOD mower deck
60-in. (152-cm) 7-Iron PRO MOD mower deck shown 60-in. (152-cm) 7-Iron PRO MOD mower deck shown
MOD mower mulch control lever MOD mower mulch control lever

Key features of the 7-Iron PRO MOD mower deck:

  • Deck can be converted from a wide-open side discharge mode to a fully chambered mulching mode with a single move of a lever.
  • Deck is stamped from 7-gauge, 0.179-in. (4.5-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
  • Significantly fewer welds on the deck shell to wear or break; it is stamped from a single sheet of steel rather than multiple fabrications. Anti-skid step on the deck provides easy machine mounting.
  • Higher blade tip speed than many competitors - 18,000 fpm (5486 m/min) for more blade cuts per inch mowed.
  • The rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
  • A deep-deck design of 5.5 in. (14 cm) delivers excellent airflow so material can be processed quickly and efficiently.
  • The wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
  • 1-in. (25-mm) cold-forged spindles are heat-treated for strength and are supported by ball bearings, providing reliability and performance; ductile cast-iron blade-spindle housings have a gusseted design for extra reinforcement.
  • The front edge is raised above the blade plane to allow even cutting of tall grass and reinforced with a square bar for durability. The front baffle has been redesigned to better manage airflow and control clippings.
  • Dual-captured anti-scalp wheels provide deck flotation over even the toughest terrain.
60-in. (152-cm) rear-discharge mower deck
60-in. (152-cm) rear-discharge mower deck 60-in. (152-cm) rear-discharge mower deck
#

The 60-in. (152-cm) rear-discharge mower is ideally suited for:

  • Areas where people are present
    • Schools
    • Parks
    • Playgrounds
    • Traffic areas (city boulevards, roadsides, etc.)
  • Conditions and application areas with long grass and weeds where wide dispersal of grass (park areas, roadsides, etc.) is not a concern

Some government bids specify that the mower is equipped with a rear discharge deck:

  • Deck is fabricated from 7-gauge, 0.179-in. (4.5-mm) steel for added deck strength and long life.
  • 0.75-in. (1.9-cm) solid steel bar is welded to the mower deck perimeter for additional strength.
  • Deep-deck design increases airflow so more material can be processed.
  • Operator can trim with either side.
  • Unique baffling system that is designed to reduce clumping and windrowing usually associated with rear-discharge mowers.
  • 1-in. to 5-in. (2.54-cm to 12.7-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match mowing conditions.
  • Gauge wheels, rollers, or side-mounted skid shoes lift the deck over uneven surfaces for a well-groomed appearance.
  • Spindles can be greased without removing belt shields.
  • 1-in. (25-mm) cold-forged spindles are reliable.
  • Heat-treating of the spindles provides additional strength.
  • Ductile cast-iron blade-spindle housings have a gusseted design for extra reinforcement.

Specifications

Engine

Manufacturer
Model no. 3TNV88C
Horsepower (gross) At 3,000 rpm, PS, 37.4 hp
27.5 kW
Displacement 100.2 cu in.
1,642 cc
Cylinders Three
Crankcase capacity 3.8 U.S. qt
3.6 L
Oil filter Full flow, replaceable, spin-on type
Lubrication Full pressure
Cooling Liquid
Air cleaner Pre-cleaner
Yes
Dry-type, replaceable

Fuel system

Fuel type Dieselo or Biodiesel (up to B20)
Fuel consumption
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Fuel tank switch/shut-off valve Yes

Electrical system

Charge system 75 amp
Battery voltage 12 V
Cold cranking amp At 18 degrees C, 490 amp
Hour meter Standard multi-function display
Operator presence starting system Standard

Drivetrain

Hydraulic pumps
Wheel motors Parker Ross TG0310, 18.9 cu in.
310 cc
Travel speed Forward
0-11.5 mph
0-18.5 km/hReverse
0-5 mph
0-8 km/h
Speed and direction control Zero turn
Hydraulic capacity Tank capacity, 3.2 U.S. gal.
12.1 L
Hydraulic oil cooler Yes
Filter Spin-on Type

Tires

Drive tires 26x12-12
Rear tires 26x12-12
Load rating 4PR

Brakes

Dynamic braking Dual hand controlled levers
Park brake Caliper disc brake
Park brake actuation Hand lever

PTO

Type Hydraulic clutch
Drive Internal wet disk clutch

Mower decks

Available widths Side discharge, Mulch On Demand? (MOD), rear dishcharge, 60 in.
152 cm
Side discharge, 72 in.
183 cm
Deck construction 7-Iron PRO: One piece stamped steel (except for 60 in. rear discharge)
Deck thickness 7 gauge
0.18 in.
4.6 mm
Discharge Side-discharge, MOD, rear-discharge
Height-of-cut range Increments
0.25 in.
0.64 cm
1.5-5.0 in.
3.8-12.7 cm
Cutting width 60, 72 in.
152, 183 cm

Blades

Length 60-in. deck, 21 in.
53.3 cm
72-in. deck, 25 in.
63.5 cm
Thickness 0.25 in.
0.64 cm
Tip speed 60-in. deck, approximately 17,480 fpm
5,328 m/min
72-in. deck, approximately 17,500 fpm
5,334 m/min
Number Three

Wheels

Caster wheel type Flat free
Caster wheel size 15x6-6
Front anti-scalp rollers LH, RH, Center
Rear anti-scalp rollers LH, RH, Center

Dimensions

Length 60-in. side-discharge, 96 in.
244 cm
Width 60-in. side-discharge and MOD, 74 in.
188 cm
72-in. deck, 86 in.
218.4 cm
Height ROPs up, 85 in.
216 cm
Weight 60-in. side-discharge, 1,774 lb
805 kg
60-in. rear-discharge, 1,827 lb
829 kg
72-in. side-discharge, 1,841 lb
835 kg

Additional information

Date collected 24-Apr-2017